Thermostat PT1000

Le Thermostat PT1000 is a simple controller equipped with a PT1000 temperature sensor, which regulates a heating system by switching the heater on or off through a relay, based on the set temperature and the measured actual temperature.

It has a wide range of possible applications, such as:

• Wood-fired boiler control: Set the system so that when the boiler temperature exceeds 60°C, it activates the mixing pump.

• Safety system: When the set temperature is reached, it can trigger an alarm, send a signal to another system, or switch off an electric heater, etc.

• Heating system priority control: When the wood-fired boiler is running, it can prevent the gas boiler from starting.

What does it do?

A precise thermostat with a PT1000 temperature sensor that stays accurate and works well even with long cable runs.
It doesn’t drift, doesn’t fail, and doesn’t make the temperature reading jump around.

Why is it good for installers?

• You set it → it works.

• No need for constant recalibration.

• No “feels like it’s off by 5 degrees” issues.

• Stable long-term → no callback, no customer complaints.

APPLICATION AREAS

• Wood-fired boiler control: Set the system so that when the boiler temperature exceeds 60°C, it activates the mixing pump.

• Safety system: When the set temperature is reached, it can trigger an alarm, send a signal to another system, or switch off an electric heater, etc.

• Heating system priority control: When the wood-fired boiler is running, it can prevent the gas boiler from starting.

Especially suitable where:

• Precise temperature control is required

• Large temperature fluctuations can occur

• Le sensor cable is long

• Long-term reliability is critical