Current relay

Първоначалната цена беше: 70,00 €.Текущата цена е: 30,00 €. без ДДС

One function.
Current relay is used to control the value of the current in the circuit measured with switch contacts function in the case of the value of current above the set threshold values.

49 на склад

x
Артикулен номер: EPP-619 Категории: , Етикети: , ,
МОЖЕ ДА ВИ ХАРЕСАТ И...
ВАШИТЕ ПРЕДИМСТВА

30-дневно право на връщане

3-годишна гаранция

Доставка по целия свят

Научете повече за Levtech!

One function.
Current relay is used to control the value of the current in the circuit measured with switch contacts function in the case of the value of current above the set threshold values.

Functioning:
Activation of relay is signaling by shining of the green LED “U”. By potentiometer is set the activation value of current. If set value of current is below of set threshold, then the joint is open (position 11-10). If set value of current exceeds of set threshold, then the joint is close (position 11-12) with set the time delay “t”. Exceeds of set threshold is signaling by shining of red LED I<. decrease=”” of=”” current=”” value=”” below=”” set=”” threshold=”” will=”” automaticly=”” open=”” joint=”” position=”” 11-10=”” br=””>

ATTENTION!
Current of receiver may be greater than 16A. Is only limited by cross-section of cable.

 

 

Power supply voltage

230 V AC

The executive element

relay

Maximum load current

16 A

Contact configuration

1 × NO/NC

Separation of the contact

YES

Time of return

0,5 s

Power return hysteresis

10%

Diameter of the through hole

4 mm

Switching current - adjustable

0,6÷16 A

Operating time - adjustable

0,5÷10 s

Терминал

pluggable terminal blocks 2,5 mm²

Tightening torque

0,4 Nm

Power consumption

0,4 W

Working temperature

-25 ÷ 50 °C

Размери

1 module (18 mm)

Assembly

on rail 35 mm

Ingress Protection Marking

IP20

Отзиви

Все още няма отзиви.

Само регистрирани клиенти, които са закупили този продукт, могат да оставят отзив.

DOCUMENTATION
RECENT REVIEWS
[product_reviews]