Pulse power supply 24 DC 60W

Output voltage 24 V. Power 60 W.
For power supply systems of electrical and electronic devices in industrial automation systems and computer networks.

Functioning
The power supply has an adjustment knob [Adjust] for adjusting the output voltage in the range 22÷27 V. Green DC OK LED indicates that the power supply at the output is correct. Red overload LED indicates current overload or voltage output overtake. The power supply has an internal short-circuit, overload, overvoltage and temperature protection.
Implementation

Type: impulse power supply

Power supply voltage: 90÷264 V AC / 120÷370 V DC

Frequency: 47÷63Hz

Maximum load current: 2,5 A

Output voltage OUT: 24 V DC

Output power: 60 W

Minimal load: 0%

Switching frequency: 100 kHz

Efficiency: 84%

Inrush current: max. 35 A

Voltage regulation range: 22÷28 V DC

Overload: 150%/3 min

WE-WY breakthrough voltage: 3 kV

WE-PE beat voltage: 1,5 kV

Breakdown voltage WY-PE: 0,5 kV

Short-circuit / overload protection: YES

Overvoltage / temperature protections: YES

Humidity (non-condensing): 95% RH

MTBF: 188000h 25°C

vibes: 10÷500 Hz, 2 G 10 min/1cykl 60 min (x,y,z)

Insulation resistance: 100 MΩ/500 V DC

Mass: 485 g

Leakage current: 3,5 mA / 240 V AC

Terminal: pluggable terminal blocks 4,0 mm²

Tightening torque: 0,5 Nm

Working temperature: -10÷70°C

Dimensions: 130 mm x 50 mm x 90 mm

Assembly: on rail 35 mm

Ingress Protection Marking: IP20